Quick Answer: How Many Pounds Can A Curtain Rod Hold?

Can tension rods hold blackout curtains?

Most likely, yes.

I’ve used a few shower curtain rods of similar design on painted drywall, and they do fine.

Blackout curtains are not lead-lined or anything.

If you install the expandable rod carefully and don’t expect it to hold the heaviest curtains out there, it should work fine..

Do curtain rods need studs?

If there IS NOT a stud, you will use a drywall anchor and a screw. The anchors are the white pieces in the below photo: Knowing which to use is very important — without a drywall anchor, a screw alone will not hold the weight of the curtain and rod. … If you do not have a stud finder, you can use a hammer and a nail.

Can you put a drywall anchor in spackle?

Tiny nail and screw holes are easiest: Use a putty knife to fill them with spackling or wall joint compound. … Yes you can put a screw/anchor into a repaired hole, especially if the repair is a superficial one as you describe. Be sure to drill a pilot hole first, and use an appropriate size anchor and screw.

How long can curtain rods go without support?

Over 96 inches, a third rod bracket is required as a center support; this is mandatory! Having said that, a 2 inch or 3-inch diameter pole can span a distance up to a full 12-feet without flexing or bowing using only two end brackets.

How far should a curtain rod extend past window?

When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side, which allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.

Why do my curtains keep falling down?

Or, you might have the wrong type of curtain rod that can’t support the weight of your curtains, causing it to sag and fall out of the wall. Family members are also common sources of curtain damage. Children can yank or pull on them when playing, bringing the curtains down.

How do you make curtain rods stronger?

Screwing directly into a stud is the most secure way to support your curtain rod and brackets. Use a stud finder to locate a stud above your window before trying other methods. If there isn’t a stud, you need to use a drywall anchor and a screw to reinforce your curtain rod brackets.

How do you hang a heavy curtain rod?

How to Hang Heavy CurtainsStep 1: Measure for Curtains. First, measure the window width and height. … Step 2: Get the Right Rod & Tools. You need the right curtain rod to support the weight of your drapes. … Step 3: Install the Brackets. … Step 4: Hang the Curtains.

How can I hang heavy curtains without nails?

There are several different methods for hanging your curtains without using nails or screws in your wall.Tension rods are probably the easiest. … Magnetic curtain rods are available as are hangers that tap in behind your window frame.Command hooks can work, too. … No-Drill Curtain Rod Brackets.Velcro.

How do you keep curtain rods from sagging?

How to Fix a Sagging Curtain Rod1 – Move Your Support Brackets. … 2 – Add Additional Support Brackets. … 3 – Insert a Support Rod. … 4 – Use a Lighter Fabric. … 5 – Shorten the Curtain. … 6 – Protect the Curtain with a Barrier. … 7 – Purchase a Heavier Duty Curtain Rod. … 8 – Replace the Support Brackets.More items…•

How much weight can drywall anchors hold?

The smallest anchors hold up to 18 pounds in 1/2” drywall, and the medium-size anchors hold up to 25 pounds in 5/8” drywall.

Can I use a shower rod to hang curtains?

We’ll start with the most obvious, which is using a shower rod as a window treatment. … You don’t have to use it just as a make-shift curtain rod, although they are perfect for hanging or laying curtains when you don’t want to make holes in your walls or windows.

Do tension curtain rods work?

Tension rods only work for windows that are on short walls. In other words, the two adjacent walls have to be close enough to the window for you to suspend a rod snugly between them. If the rod doesn’t fit tightly enough, your curtains will collapse. … It is difficult to find tension rods that are longer than 84 inches.

How much weight can a 5’8 curtain rod hold?

In this regard, how much weight can a 5’8 curtain rod hold? 9 lbs per foot and the fluted version only holds 1.5 lbs per foot. This means an 8′ wide window drapery cannot weigh more than 7.2 lbs or 12 lbs. Secondly, how do you reinforce a curtain rod bracket?

Can a curtain rod hold clothes?

A shower curtain rod is not as strong as a regular closet rod. … Some aluminum curtain rods are strong enough to support some clothes, but their main use is to hang a single shower curtain. The rod should not be placed inside the closet without brackets, as the brackets will add strength and support weight.