- Can you use a drum sander against the grain?
- Should I sand or strip my deck?
- How long does it take to strip a deck?
- Should I use a drum or orbital sander?
- What if it rains after I sand my deck?
- How much does it cost to sand a deck?
- Can I use a belt sander on my deck?
- What kind of Sander should I use on my deck?
- Are you supposed to sand with the grain?
- How long does it take to sand a floor with a drum sander?
- Should I pressure wash my deck?
- Can I use a floor sander on a deck?
Can you use a drum sander against the grain?
Sanding with or against the grain doesn’t matter much until the last sanding stage, if that.
Lots of us use random-orbit sanders which sand in all directions at once, and that works Just Fine..
Should I sand or strip my deck?
Sanding is preferable where less penetration is required and the deck is flat, but the process requires additional labor and time to achieve consistent results. A stripper can often be the best option for larger decks, even though the cost will be significantly higher.
How long does it take to strip a deck?
Cost to Strip and Stain a Deck A qualified contractor will charge about $50 per hour for stripping the wood, which can take between 10 and 20 hours.
Should I use a drum or orbital sander?
“If your floor is in rough shape, cupped or damaged, or has a very heavy finish, a drum sander is what you need,” he adds. “An orbital won’t relevel your floor.”
What if it rains after I sand my deck?
It’s important that you make sure there is no chance of rain when you begin to sand. If the wood gets wet after it’s been sanded, but not before you’ve had the chance to stain or paint it, you’ll be back to square one — you’ll need to wash and sand it all over again.
How much does it cost to sand a deck?
The cost to sand a deck is $280 on average. Most homeowners spend between $210 and $350 for a 200-square foot deck, which takes about seven hours to sand. If you choose to sand your deck yourself, you’ll need to purchase an orbital sander, which costs $75 on average.
Can I use a belt sander on my deck?
Choose the right sander. Although a floor sander is great for wood flooring – indoors – it’s not an ideal choice for the rougher, more uneven surface of a deck. Instead, use a belt sander (for large expanses) or a finishing sander (for spot sanding, as well as for corners and edges).
What kind of Sander should I use on my deck?
For sanding deck floorboards, use sandpapers with grits of 60 or 80, but no rougher than that. Sanding with finer-grit papers (100-grit or above) will smooth the wood to the point where the pores begin to close down, which will hinder the absorption of stain or sealer into the wood.
Are you supposed to sand with the grain?
Sanding cross-grain tears the wood fibers so the sanding scratches show up much more, especially under a stain. The best policy is to always sand in the direction of the grain when possible. The scratching that does occur is then more likely to be disguised by the grain of the wood.
How long does it take to sand a floor with a drum sander?
Three sanding passes with both the drum sander and the edger in one room of 140 sq. ft. takes the average customer, working alone, 5 hours.
Should I pressure wash my deck?
Ideally, power washing a wood deck will not ruin the wood and etch or erode the softwood fibers. However, when wood gets wet, the fibers may become raised, creating a rough surface. This is a particular problem on handrails, where the raised fibers can lead to splinters. Make sure the wood is dry before sanding.
Can I use a floor sander on a deck?
Sanding your deck with a floor sander It is possible to use a floor sander to sand your deck, although we still advise you to use a hand-held belt sander for best results. … Just make sure to go slow and steady to get an even finish, and make sure all parts of the deck have been sanded down.