Question: Do Any Stud Finders Actually Work?

How do you find a stud without a detector?

If you don’t find signs of a stud 16 inches from the first one, measure 24 inches from the first stud and look again there.

Drive a small nail into the wall where you believe you have found a stud.

If the nail doesn’t hit wood under the plaster or drywall, pull it out and insert a wire hanger into the hole..

Are electrical wires attached to studs?

A stud finder will help you locate studs, which are the vertical beams that frame and support your house. “Electrical wires often run vertically along studs,” says Matt Daigle, founder and CEO of sustainable home improvement site Rise.

What should I look for in a stud finder?

Everything You Need to Know when Buying a Stud FinderDefining a Stud Finder. … Sensor Type. … Sensor Size. … Center Targeting Capabilities. … Grip and Design. … Visual Display. … Alert Systems. … Additional Scanning Features.More items…

Do I need a stud finder to hang a TV?

Because of this, the location you choose will need a stud (or two) to anchor the screws. Use a stud finder to locate the studs in your wall to determine where you can hang the TV. Do not attempt to use drywall anchors to hang it. … Choose another location that does have a stud where you need it.

Can a stud finder find water pipes?

In general, yes. Stud finders are designed to find any obstruction in the wall – including water pipes. So if you are just handling a project around the house, you can rely on your stud finder to locate pipes.

How effective are stud finders?

A good stud finder can be the difference between a successful DIY home project and disaster. … All stud finders can detect wood, most detect metal, and many also detect live electrical wiring. Some finders provide basic detection capabilities that are good for just walls. Others can be used on floors and ceilings.

Why do stud finders not work?

1) Check Your Battery. If your stud finder worked previously, but no longer seems to work, about 9 times out of 10, the problem is a weak battery. You may swear that the battery is still good, but it’s not. … Each of these batteries has a printed expiration date, but they are all in different locations on the battery.

Can I use my iPhone as a stud finder?

The iPhone beeps when its magnetometer, in the upper right of the phone, is near metal. Stud Find is an iPhone application that uses the device’s built-in magnetometer to find metal studs, screws, nails and anything metallic in a wall.

What happens if I drill into a wire?

You drill into one conductor, almost severing it but not quite. Everything is fine until the cable is left carrying power near its rated capacity for an extended period, at which point the weak point gets hot. It might melt and cut the power, or if you are unlucky it arcs and sets fire to something.

Can you use a magnet as a stud finder?

Use magnets to help locate the screws in the studs, but also try to imagine the hidden structure underneath. While magnets are usually helpful, the process is easier if you look for some underlying clues. Many studs are spaced about 16 inches apart. Start your search from one edge of the wall, and work 16” from there.

Is there a stud finder that actually works?

Hanson 03040 Magnetic Stud Finder. After 30 hours of research and testing against five other magnetic stud finders, we found the C.H. Hanson to be reliable, durable, and accurate, and we also like it because it doesn’t need batteries or any kind of calibration.

Do stud finders detect wires?

Using an electronic stud finder, you can detect live wires behind the walls or through the studs. An electronic stud finder is a tool that will let you find studs, beams, joists, or wires.